Atmosphere, climate, and weather

A Survival Water Filter – Part 1

Screen-Shot-2015-04-07-at-8.31.56-PM

In the world we live in, we never know what is coming next. Fires, hurricanes, and other natural disasters can lead to disastrous situations. That is why we should always be prepared to be able to survive in many conditions. One key factor to survival in all situations is to get clean and safe water for drinking. In this article I will share how to build a filter for water purification, using only materials found in the wilderness (with the exception of cloth). I will also show you how to finally boil your water for purification in the wilderness.

So let’s get started!

First, gather all needed materials. you will only need one tool – A knife. Here is the list of the materials we will be using:

– Birch Bark

– A Small Live Branch or Small Live Plant

– Charcoal

– Gravel

– Stones

– A piece of clothing

The first thing we are going to need is the birch bark. We will use this bark to hold the filter together in a cone shape. Cut the bark in a half circle with a diameter of roughly one foot. Then, roll the bark into a cone. Of course, you could also use the top of a waterbottle that is cut in half (if you can find it during emergency situations).

The second item is a small live branch. Normally I wouldn’t suggest to cut live branch, but we are talking about a survival situation. We need to use the live branch or plant to tie the cone shape together.

What’s next? Continue on Part 2.

Leave a Reply